What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
The publisher is making several good points related to No Hot Water — Water Heater Repair overall in this post below.
Numerous modern residences use an electric water heater for their furnace, as a result of its comfort and convenience of use. Nonetheless, much like any other electrical devices, issues may emerge with its use, unexpectedly. It can be actually discouraging to wake up to a cool shower rather than a hot one or having your bathroom with water that isn't hot adequate and even too warm. Whatever the situation may be, hot water heater problems can be fairly stressful. The good news is, we've made a listing of feasible solutions to your water heater concerns. There are a number of aspects that could trigger many of these problems, maybe a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the trouble is, getting it fixed ought to not present too much of a problem if you follow these actions:
Call A Professional:
If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't functioning, you may require to contact a specialist plumber for an expert opinion. The issue with your heating system could be that the hot and cold taps have actually been switched or it may be undersized for the quantity of hot water needed in your house. Whatever the case may be, an expert plumber would certainly help fix the trouble.
Check Your Power Supply:
As fundamental as this might seem, it is extremely needed. Without ample power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the problem, merely transform it on and off once more. Change any kind of busted or damaged fuse. Examine the device with power after these adjustments to see if it's currently functioning.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may need to check the temperature settings on your upper thermostat. Ensure the breaker is turned off prior to doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This should help warm the water. Transform the circuit breaker back on and examine if the issue has been dealt with.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, after that try checking out your burner if it is still working. Test each of your burner to make sure the problem isn't with any one of them. If any of them is faulty, change that part and afterwards inspect whether the hot water is back on.
Verdict
Water heater troubles are not constantly major. Most of them are because of minor problems like a blown fuse or worn-out burner. Replacing the damaged components need to work. However, if you are still not able to solve the trouble, give a call to your closest plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a passionate person who reads about No Hot Water — Water Heater Repair, I thought sharing that piece of content was a good idea. Sharing is nice. Helping people is fun. Thank you so much for taking the time to read it.
Book 24/7
Report this page